3 in 1 Solar Stallion Troubleshoot


Stallion Not Moving

- Make sure that all plastic protrusions (burrs) are cut or sanded off of all plastic parts from grid A and B. These protrusions cause the moving parts of the stallion to jam and become caught on eachother, rendering the kit motionless. See example below:


- Make sure kit is taken outside under direct sunilght. The solar panel is very sensitive and best results are obtained when operated on a sunny day.

- Product will not run on a cloudy day, in shaded locations, indirect sunlight, or under a flourescent light.

- To use indoors, use a 100 watt halogen light. 


***Note: If you need a replacement part you can order it online here, https://owirobot.com/pages/Parts-Order-Form.html or fill out the warranty form in the back of your manual and send it to: 

Email: info@owirobot.com


Fax: (310) 515-0927