Happy Hopping Frog Troubleshoot


-          Take robot outside under direct sunlight

-          insert motor wire precisely as illustrated in step 9

-          make sure A7 hook faces towards the back of the frog

-          make sure the angle of A7 and A8 is 90 degrees

-          make sure plastic part (A7) is pushed all the way towards plastic part (A2).

-          adjust white gear on motor in such a way that it is not touching any part of the body

-          tighten both tapping screws


***Note: If you need a replacement part you can order it online here, https://owirobot.com/pages/Parts-Order-Form.html or fill out the warranty form in the back of your manual and send it to: 

Email: info@owirobot.com


Fax: (310) 515-0927