- Take robot outside under direct hot sunlight or use a 100W halogen light
- Double-check red and black wires are distant from each other (page3 step3)
- Double-check to see if the gear in part P5 is engaged with the gear in the motor (page4 step4)
- Double-check to see if the wires are not crossed and touching the shaft (page4 step5)
- Check to see if the plastic has been removed off the solar panel (page 5 step2)
- Check to see if the connection from ‘solar module’ to ‘gearbox’ wiring for each mode is correct
- Check to see if the wires are tightly inserted into the spring
***Note: If you need a replacement part you can order it online here, https://owirobot.com/pages/Parts-Order-Form.html or fill out the warranty form in the back of your manual and send it to:
Email: info@owirobot.com
or
Fax: (310) 515-0927