- Take robot outside under direct sunlight
- insert motor wire precisely as illustrated in step 9
- make sure A7 hook faces towards the back of the frog
- make sure the angle of A7 and A8 is 90 degrees
- make sure plastic part (A7) is pushed all the way towards plastic part (A2).
- adjust white gear on motor in such a way that it is not touching any part of the body
- tighten both tapping screws
***Note: If you need a replacement part you can order it online here, https://owirobot.com/pages/Parts-Order-Form.html or fill out the warranty form in the back of your manual and send it to:
Email: info@owirobot.com
or
Fax: (310) 515-0927