- Take robot outside under direct sunlight or use a 100W halogen light
- Push the pinion gear towards the motor so it does not touch/rub against the body
- Move wires away from the pinion gear
- Make sure front and rear shafts are fully snapped into place
- Check to see if the red and black wires are not pinched between the solar panel and the black plastic piece. Carefully and gently free the wires, if pinched
- Adjust the red gear for ease of movement
***Note: If you need a replacement part you can order it online here, https://owirobot.com/pages/Parts-Order-Form.html or fill out the warranty form in the back of your manual and send it to:
Email: info@owirobot.com
or
Fax: (310) 515-0927