OWI has made robotic arm technology more affordable without compromising quality. With Robotic Arm Edge, command the gripper to open and close, wrist motion of 120 degrees, an extensive elbow range of 300 degrees, base rotation of 270 degrees, base motion of 180 degrees, vertical reach of 15 inches, horizontal reach of 12.6 inches, and lifting capacity of 100g. WOW! Some of the added features include a search light design on the gripper and a safety gear audible indicator is included on all five gear boxes to prevent any potential injury or gear breakage during operation. How does this equate to fun?
Check out what the Chester County Career Center has to say: Blog
Ages: 13+
Dimensions: 9" x 6.3" x 15"
No. of Pieces: 197
Batteries Required: 'D' size x 4 (Not Included)
Motor Specification:- |
|
|
|
Item |
Specs |
Remarks |
|
Operating Voltage |
DC3V |
|
|
No Load Current |
255mA Max. |
|
|
No Load Speed |
12340rpm ±12% |
|
|
Starting Voltage |
|
|
|
Starting Current |
|
|
|
Stall Torque |
60g-cm |
|
|
Stall Current |
3170mA |
|
Motor Dimensions:- |
|
|
|
End Shaft ( Metal Case Side) |
9.4 ±0.5mm |
|
|
End Play |
0.05~0.60mm |
|
|
End Shaft (End Bell Side ) |
|
|
|
Motor Length |
25.0 ±0.3mm |
|
|
Motor Diameter |
Φ20 ±0.2mm |
|
|
End Bell Case Width |
Φ15.1 ±0.15mm |
|
|
Bearing Case Diameter |
Φ10 +0.05/-0.25mm |
|
|
Bearing Case Width |
8.9 ±0.25mm |
Tolerance : ±12%
21 Reviews Hide Reviews Show Reviews
-
Best even for the tenative
This was my first robot. As a 26 year old girl with not much robot experience (ok, any robot experience) this was fantastic! No sodering, which I loved. Great instructions. A fantastic purchase for anyone who loves to tinker.
-
Great Project
Fun project to build. One of the best instruction manuals I have used. Fun to play with after you build it.
-
Great hardware, adequate software
Bought this and built it with my kids, had great fun. The software for the USB control was not Linux compatible, so I wrote some. You can get it here http://kyllikki.github.com/EdgeRobotArm/
-
love my robot
does anyone know if you can use USB Interface kit with windows 7 - 64 bit?
-
Great Introduction To the Robotics Hobby
I am 34 and have always dreamed of building a robot. This introduced me to the basics and was a lot of fun to build. It also required a lot of patience to work with the smaller parts. It is important not to over tighten the pincer assembly as it will trip the safety switches and not allow the pincer assembly to work right. Overall a very good product.
-
Great Holiday Present!!!
as a 12 year old boy building and playing with this robot was an awesome experience. I highly suggest it for a present. Also when making the head or grabbers, make sure you use the right metal poles
-
coolest robot ever!!!!!!
when i first saw that robot i thought that it was a ripoff so then i saw the video and i was amazed and i wanted to buy that coolest robot as soon as possible.then after that my sister wanted one to so then i told my dad if i could get one for me and one for my sister then he said he would get the robot for me and my sister.after i opened my package i sceamed. i was so happy to get that cool robot
-
Best...Robot...Ever!!!
Great product!! I built it and it works great! I set up a little crane machine game with it. Material for game:prizes, Stand to put crane on, and a few kids!!!
-
Kid very happy
I bought this for my 9 year old son. He couldn't stop working in the assembly until he finished about 8 hours later. He did it all by himself just following the drawings in the manual since he doesn't speak english. He loves this project from the beginning.
